part number: LUG11W published date : mar 20,2008 drawing no : sd sa1577 v5 checked : b.l.liu p.1/4 t-1 (3mm) solid state lamp www.sunled.com part number emitting color emitting material lens-color luminous intensity (if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUG11W green gap water clear 18 59 565 34 features low power consumption. popular t-1 diameter package. general purpose leads. reliable and rugged. long life - solid state reliability. available on tape and reel. rohs compliant. absolute maximum ratings (t a =25c ) ug (gap) unit reverse voltage v r 5 v forward current i f 25 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 62.5 mw operating temperature t a -40 ~ +85 storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds c lead solder temperature [5mm below package base] 260c for 5 seconds ug (gap) unit forward voltage (typ.) (i f =10ma) v f 2.0 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 565 nm wavelength of dominant emission (typ.) (i f =10ma) d 568 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 30 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c ) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice.
part number: LUG11W published date : mar 20,2008 drawing no : sd sa1577 v5 checked : b.l.liu p.2/4 t-1 (3mm) solid state lamp www.sunled.com ug
part number: LUG11W published date : mar 20,2008 drawing no : sd sa1577 v5 checked : b.l.liu p.3/4 t-1 (3mm) solid state lamp www.sunled.com remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
part number: LUG11W published date : mar 20,2008 drawing no : sd sa1577 v5 checked : b.l.liu p.4/4 t-1 (3mm) solid state lamp www.sunled.com packing & label specifications LUG11W
|